Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the Automatic Transmission Shift Lever assembly.
- Ignition OFF, test for less than 1.0 ohm of resistance between the ground circuit terminal B and ground.
- If greater than the specified range, test the ground circuit for an open/high resistance.
- While pressing the brake pedal, verify that a test lamp illuminates between the control circuit terminal A and ground.
- If the test lamp does not illuminate, test the control circuit for a short to ground or an open/high resistance. If all circuits test normal, test or replace the BCM.
- If all circuits test normal, test or replace the shift lock actuator.