LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CXS >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Remote Power Steering Fluid Reservoir Replacement >> Removal Procedure

Removal Procedure

  1. Siphon the power steering fluid from the reservoir.
  2. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement .
  3. Disconnect the electrical harness clip at the underhood junction block and at the coolant reservoir.
  4. Disconnect the engine control module (ECM) wire harness from the ECM wire harness clip on the reservoir.
  5. Disconnect the power steering hoses from the power steering reservoir.
    6. Fig 1: Locating Power Steering Reservoir Mounting Stud Bolt
    GM1386751Courtesy of GENERAL MOTORS CORP.
  6. Remove the power steering reservoir and bracket bolts, and remove the reservoir and bracket assembly from the vehicle.
  7. Cap off the power steering reservoir and hoses to prevent contamination.
scientia non olet · About LEMON Manuals