LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CXS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
  2. Remove the closeout/insulator panel from under the dashboard on the drivers side. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
    3. Fig 1: View Of Accelerator Pedal Components
    GM1404029Courtesy of GENERAL MOTORS CORP.
    NOTE: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
  3. Disconnect the accelerator pedal position (APP) sensor electrical connector from the accelerator pedal module.
  4. Remove the APP sensor mounting bolts.
  5. Remove the APP sensor from the vehicle.
scientia non olet · About LEMON Manuals