LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CXL >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

    IMPORTANT: Verify that the release lever at the top of the bracket is in the full up position.
    Fig 1: View Of Shoulder Belt Guide Adjuster Bracket
    GM157286Courtesy of GENERAL MOTORS CORP.
  1. Position shoulder belt guide adjuster bracket to the center pillar.
    2. NOTE: Refer to Fastener Notice .
  2. Install the shoulder belt guide belt adjuster bracket bolts.

    Tighten:  Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).

  3. Install the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.
  4. Install the guide loop to the guide adjuster bracket.
  5. Install the guide loop nut.

    Tighten:  Tighten the guide loop nut to 42 N.m (31 lb ft).

  6. Close the guide loop cover.
scientia non olet · About LEMON Manuals