LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Generator Bracket Bolts - 3.6L
    GM887707Courtesy of GENERAL MOTORS CORP.
  1. Install the generator bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the generator bracket bolts.

    Tighten:  Tighten the generator bracket bolts in the sequence shown.

    1. Tighten the generator bracket bolts (1) to 50 N.m (37 lb in).
    2. Tighten the generator bracket bolts (2) to 50 N.m (37 lb in).
    3. Tighten the generator bracket bolt (3) to 23 N.m (17 lb in).
  3. Install the belt tensioner. Refer to Drive Belt Tensioner Replacement .
  4. Install the coolant inlet pipe lower bolt from the generator bracket.
  5. Install the generator. Refer to Generator Replacement (3.8L)  or Generator Replacement (3.6L) .
scientia non olet · About LEMON Manuals