LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2006 >> Rainier 5.3 M, AWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Wheel Speed Sensor Ring Replacement - Rear >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  3. Remove the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement .
  4. Remove the rear axle housing cover. Refer to REAR AXLE HOUSING COVER AND GASKET REPLACEMENT .
  5. Remove the axle shaft. Refer to REAR AXLE SHAFT REPLACEMENT .
    6. Fig 1: View Of Wheel Speed Sensor Ring, Axle Housing & Removal Tool
    GM889095Courtesy of GENERAL MOTORS CORP.
  6. Remove the axle shaft seal, the bearing and the wheel speed sensor ring from the axle housing using the J 45857  (1) and the J 2619-01  (2).
scientia non olet · About LEMON Manuals