LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2006 >> Allure CXS >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Child Restraint Tether Brackets
    GM604202Courtesy of GENERAL MOTORS CORP.
  1. Install the child seat tether brackets to the slots in the rear shelf.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the child seat tether bracket to rear shelf bolts.

    Tighten:  Tighten the child seat tether bracket to rear shelf bolts to 20 N.m (15 lb ft).

  3. Push the sound barrier back into its original position.
  4. Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
scientia non olet · About LEMON Manuals