LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2006 >> Allure CX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> Preparation

Body Control Module (BCM) Programming/RPO Configuration: Preparation

  1. Understand this entire procedure.
  2. The battery is fully charged.
  3. The ignition switch is in the ON position.
  4. The data link connector (DLC) is accessible.
  5. All disconnected modules and devices are reconnected before programming.
  6. Follow all Scan Tool on screen directions.
  7. Take time to verify the VIN on the Scan Tool is correct, failure to do this could result in the service part being made unprogrammable.
scientia non olet · About LEMON Manuals