LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Rendezvous Ultra, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.6L - Introduction >> Repair Instructions >> Intake Manifold Runner Control Solenoid Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Intake Manifold Runner Control Solenoid
    GM1395967Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: DO NOT disconnect the power steering hoses or drain the power steering fluid.
  1. Remove and reposition the power steering fluid reservoir to gain access. Refer to Remote Power Steering Fluid Reservoir Replacement (LY7) in Power Steering System.
  2. Disconnect the electrical connector to the control module for the intake manifold runner.
  3. Remove the intake manifold runner control solenoid bolts.
  4. Remove the intake manifold runner control solenoid.
scientia non olet · About LEMON Manuals