LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Rendezvous CX, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Intake Air Temperature (IAT) Sensor Electrical Connector
    GM740106Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor (1) by snapping into place.
  2. Connect the IAT sensor electrical connector.
scientia non olet · About LEMON Manuals