LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Rainier 5.3 M, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Repair Instructions >> Repair Instructions >> Floor Shift Control Knob Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Floor Shift Control Knob
    GM744528Courtesy of GENERAL MOTORS CORP.
  1. Install the knob and boot assembly onto the transmission control (4).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Engage the locking tabs (2) with the console assembly.

    Tighten:  Tighten the control knob set screw (1 or 3) to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals