Rear Toe Adjustment
- Loosen the inner adjustment link cam nut (2).
- In order to adjust the toe, rotate the cam bolt.
Tighten: Tighten the cam nut to 91 N.m (67 lb ft).
- Tighten the tie rod nut.
Tighten: Tighten the tie rod nut to 64 N.m (47 lb ft).
- Recheck the toe setting after tightening.
- Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications in Wheel Alignment.
IMPORTANT:
Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.
NOTE:
Refer to Fastener Notice in Cautions and Notices.