LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Engine Controls - Introduction) >> Repair Instructions >> Throttle Body Air Inlet Screen Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
    2. Fig 1: Removing/Installing Throttle Body Air Inlet Screen
    GM180140Courtesy of GENERAL MOTORS CORP.
  2. Remove the snap ring (3) from the throttle body (1).
  3. Remove the throttle body air inlet screen (2) from the throttle body (1).
scientia non olet · About LEMON Manuals