Setup for Component Replacement
WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for a complete repair. If any of the following components are replaced, a memory seat calibration must be performed. Refer to Memory Seat Calibration Procedure in Seats.
- Actuator - horizontal
- Actuator - vertical
- Lumbar replacement
- Lumbar switch
- Memory seat switch
- Power recliner motor
- Power recline drive cable
- Seat
- Seat adjuster
- Seat switch
- Seat adjuster motor - horizontal
- Seat adjuster motor - vertical