LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> LeSabre Limited, 4T65E/MN3 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Throttle Body Air Inlet Screen Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
    2. Fig 1: Removing/Installing Throttle Body Air Inlet Screen
    GM180140Courtesy of GENERAL MOTORS CORP.
  2. Remove the snap ring (3) from the throttle body (1).
  3. Remove the throttle body air inlet screen (2) from the throttle body (1).
scientia non olet · About LEMON Manuals