LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> LeSabre Limited, 4T65E/MN3 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Ignition Coil(s) Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition switch.
    2. Fig 1: View Of Ignition Coil Module And Module Mounting Bracket
    GM12299Courtesy of GENERAL MOTORS CORP.
  2. Note order and disconnect the spark plug wires from the coil assemblies.
  3. Remove the screws (1) securing the coil assemblies to the ignition control module (ICM).
  4. Remove the coils (2) from the ICM (3).
scientia non olet · About LEMON Manuals