Installation Procedure

Fig 1: View of Lateral Accelerometer Sensor Electrical Connector, Lateral Accelerometer Sensor Screws, & Lateral Accelerometer Sensor

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 2 lateral accelerometer sensor screws (3).
Tighten: Tighten the 2 lateral accelerometer sensor screws to 2.4 N.m (21 lb in).
Connect the lateral accelerometer sensor electrical connector (2).
Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.