LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Head Up Display Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Fastener & HUD Switch
    GM660090Courtesy of GENERAL MOTORS CORP.
  1. Install the HUD switch (3) to the IP trim plate.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fastener (1).

    Tighten:  Tighten the fastener (1) to 2 N.m (18 lb in).

    3. Fig 2: View of Trim Plate & Electrical Connectors
    GM428497Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (3).
  4. Install the IP trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Left .
scientia non olet · About LEMON Manuals