Removal Procedure

Put the window in the down position.

Fig 1: Removing Trim Panel
Courtesy of GENERAL MOTORS CORP.

Grasp the window weatherstrip at the lower rear corner.
Pull up and forward in order to release the window weatherstrip from the door frame far enough to expose the door applique fasteners.

Fig 2: View of Front Door Applique Fasteners

Courtesy of GENERAL MOTORS CORP.

Fig 3: View of Rear Portion of Outer Belt Sealing Strip

Courtesy of GENERAL MOTORS CORP.

Detach the rear portion of the outer belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Outer .
Remove the door applique by sliding rearward, outward, and down.