LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Install the power seat switch into the switch bracket.
  2. Install the wiring harness in the position in which it was removed.
  3. Connect the electrical connectors to the power seat switches.
  4. Slide the bracket with the switches upward into the seat cushion frame.
  5. Install the retainers in order to secure the bracket and switches to the seat cushion frame.
  6. Install the seat cushion cover over the switches aligning the holes in the cover to the switch assembly.
  7. Position the power seat switch bezel over the switches.
  8. Install the power seat switch bezel fasteners.
    9. Fig 1: View of Power Seat Switch Knobs
    GM672647Courtesy of GENERAL MOTORS CORP.
  9. Install the power seat switch knobs (1).
  10. Install the seat cushion. Refer to Seat Cushion Replacement - Front .
  11. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.
scientia non olet · About LEMON Manuals