LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Remove the battery. Refer to Battery Replacement in Engine Electrical.
  2. Drain the cooling system. Refer to Draining and Filling Cooling System .
  3. Fig 1: Locating Cooling Fan Harness Electrical Connector
    GM368749Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the cooling fan electrical connector.
  5. Remove the right and left engine mount struts. Refer to Engine Mount Strut Replacement in Engine Mechanical - 3.1L.
  6. Remove the right and left engine mount strut brackets. Refer to Engine Mount Strut Bracket Replacement - Upper Radiator Support in Engine Mechanical - 3.1L.
  7. Remove the air cleaner and duct assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.1L.
  8. Remove the radiator inlet hose from the radiator.
  9. Remove the powertrain control module (PCM) harness from the fan shroud clip.
  10. Fig 2: Cooling Fan Shroud Bolts
    GM788121Courtesy of GENERAL MOTORS CORP.
  11. Remove the cooling fan shroud bolts.
  12. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  13. Remove the push pin retainer from the lower left side of the fan shroud.
  14. Remove the transmission oil cooler lines from the retainer clip at the bottom of the cooling fan shroud.
  15. Remove the lower air deflector. Refer to Radiator Air Baffle and Deflector Replacement - Lower .
  16. Fig 3: Removing/Installing Radiator Hoses To/From Radiator
    GM455227Courtesy of GENERAL MOTORS CORP.
  17. Use J 38185  to remove the outlet hose clamp from the radiator. See Special Tools .
  18. Remove the outlet hose from the radiator.
  19. Lower the vehicle.
  20. Remove the cooling fan shroud clip from the top of the radiator.
  21. Fig 4: Radiator Upper Support Brackets
    GM788409Courtesy of GENERAL MOTORS CORP.
  22. Remove the radiator upper support brackets that connect to the fan shroud.
  23. Remove the cooling fan shroud.
  24. Disconnect the transaxle oil cooler pipes from the radiator. Refer to Transmission Fluid Cooler Line Quick Connect Fitting in Automatic Transaxle - 4T65-E.
  25. Remove the coolant reservoir hose from the radiator overflow neck.
  26. Remove the radiator.