LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wiper Motor Cover Replacement >> Installation Procedure

Installation Procedure

  1. Position the wiper motor cover to the wiper motor.
    2. Fig 1: Wiper Motor Cover & Screws
    GM334241Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the wiper motor cover screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Install the wiper drive system module. Refer to Wiper Drive System Module Replacement .
  4. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  5. Operate the windshield wipers and inspect for proper operation.
scientia non olet · About LEMON Manuals