LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Torque Converter Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Torque Converter Covers
    GM631009Courtesy of GENERAL MOTORS CORP.
  1. Install the torque converter covers.
    2. NOTE: Refer to Fastener Notice in CAUTIONS AND NOTICES .
  2. Install the torque converter cover bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals