Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Use the J 34094-A
to set the middle thermo pin (123). See Special Tools .
- Install the new thermo element plate (122).
- Install the pin (120) and the washer.
- Use the J 34094-A
to set the height of the pin and the washer furthest from the accumulator. See Special Tools .
- Use the J 34094-A
to set the height of the second pin (120) and the washer. See Special Tools .
Courtesy of GENERAL MOTORS CORP.
- Install the thermo element (121) between the two pins (120). The V in the thermo element (121) must contact the thermo element plate (122).
- Install the oil pan. Refer to Oil Pan Replacement .
- Lower the vehicle.