LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Oil Pan Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Transaxle Oil Pan And Gasket
    GM164804Courtesy of GENERAL MOTORS CORP.
  1. Install the oil pan gasket (25).
  2. Install the oil pan (24).
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the oil pan bolts (23).

    Tighten:  Tighten the bolts to 14 N.m (10 lb ft).

  5. Lower the vehicle.
  6. NOTE: Refer to Do Not Overfill the Transmission Notice in CAUTIONS AND NOTICES .
  7. Fill the transaxle with DEXTRON® III. Refer to Fluid Capacity Specifications .
  8. Place the gear selector in the Park position.
  9. Start the engine.
  10. Run the engine at a slow idle. Do NOT race the engine.
  11. Adjust the fluid level.
  12. Inspect for leaks.