LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Automatic Transmission Mount Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the left engine splash shield. Refer to Splash Shield Replacement - Engine in Body Front End.
  4. Use floor stands to support the transaxle.
  5. Fig 1: View Of Transaxle Bracket To Transaxle Mount Upper Nuts
    GM161248Courtesy of GENERAL MOTORS CORP.
  6. With a jack, slightly take the weight off mount, and remove the transaxle bracket to transaxle mount upper nuts.
  7. Fig 2: View Of Transaxle Mount Bracket And Bolts
    GM161246Courtesy of GENERAL MOTORS CORP.
  8. Remove the transaxle bracket to transaxle bolts.
  9. Remove the transaxle bracket.