LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Exhaust System) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oxygen Sensor Wiring Harness
    GM195267Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. NOTE: Refer to Catalytic Converter Movement Notice in Cautions and Notices.
  2. Support the exhaust system.
  3. Remove the catalytic converter. Refer to Catalytic Converter Replacement .
  4. Remove the oxygen sensor wiring harness (3) from the catalytic converter heat shield.
    5. Fig 2: Catalytic Converter Heat Shield
    GM289490Courtesy of GENERAL MOTORS CORP.
  5. Remove the catalytic converter heat shield rivets.
  6. Remove the catalytic converter heat shield.
scientia non olet · About LEMON Manuals