LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis >> Installation Procedure

Installation Procedure

  1. Install the EVAP purge pipe into the fuel bundle.
    2. Fig 1: Identifying Pipe Routing
    GM189079Courtesy of GENERAL MOTORS CORP.
  2. Install the fuel hose/pipe bundle. Refer to Fuel Hose/Pipes Replacement - Filter to Engine .
scientia non olet · About LEMON Manuals