Removal Procedure
- Insert a plastic flat-bladed tool at the front edge of the switch mounting plate. Press the tool rearward to release the mounting plate retainer and lift up on the front of the plate.
- Using a small flat-bladed tool, carefully release the mirror switch retainers and remove the switch.
- Disconnect the electrical connector from the switch.
- Remove the switch from the door.
CAUTION:
Disconnect the power window switch when working inside the driver door. When operated, the Express Up/Down Feature allows the door window to move very quickly, without stopping, which could cause personal injury.
NOTE:
Apply protective coating/tape at the insertion point of the small flat-bladed tool in order to prevent damage to the inner door trim panel.
IMPORTANT:
When removing a door trim panel or switch plate, the ignition switch must be in the OFF position. This will eliminate the possibility of shorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.