LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure

Installation Procedure

  1. Position the data link connector to the instrument panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Removing/Installing DLC & Screws
    GM652086Courtesy of GENERAL MOTORS CORP.
  2. Install the screws to the data link connector.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals