Inflatable Restraint Front End Sensor Replacement

Fig 1: View Of Inflatable Restraint Front End Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Preliminary Procedures CAUTION: Refer to SIR Caution in Cautions and Notices. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 1 . Remove the upper air baffle and deflector. Refer to Radiator Air Baffle and Deflector Replacement - Upper .
1	Bolt, Inflatable Front End Sensor Mounting (Qty: 2) Tighten: 8 N.m (71 lb in)
2	Connector, Connector Position Assurance (CPA)
3	Sensor, Inflatable Front End