LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
  2. Remove the left sunshade. Refer to Sunshade Replacement in Interior Trim.
  3. Gently pull down the headliner.
  4. Remove the inside air temperature sensor from the headliner.
    5. Fig 1: Disconnecting Inside Air Temperature Sensor Connector From The Inside Air Temperature Sensor
    GM675996Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the inside air temperature sensor.
    6. Fig 2: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  6. Remove the inside air temperature sensor from the headliner.
scientia non olet · About LEMON Manuals