Scan Tool Data List
WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
BCM Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, Engine OFF | |||
| Battery Voltage | Data | Volts | 12.5 |
| SWC Switch Voltage | Data | Volts | 0 |
| GM Part Number | ID information | 8 digits | xxxxxxxx |
| Julian Date of Build | ID Information | 3 digits | xxx |
| Year Module Built | ID information | 4 digits | xxxx |
| Ignition 0 | Inputs | On/Off | On |
| Ignition 1 | Inputs | On/Off | On |
| Ignition Accessory | Inputs | Active/Inactive | Active |
| Key in Ignition | Inputs | Yes/No | Yes |
| Left Rear/Rear Cargo Door Ajar Switch | Inputs | On/Off | Off |
| Right Rear Door Ajar Sw. | Inputs | On/Off | Off |
| RAP Relay | Outputs | On/Off | On |
| SWC Switch Power | Outputs | On/Off | On |
DDM/FPDM Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, Engine OFF | |||
| Door Ajar Switch | Inputs | On/Off | Off |