LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Body Rear End) >> Repair Instructions >> Switch Replacement - Midgate Latch >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Midgate Inner Panel
    GM1427709Courtesy of GENERAL MOTORS CORP.
  1. Install the latch release switch to the hole in the midgate inner panel.
  2. Press the latch release switch (2) in until all the retaining tabs are fully seated.
  3. Connect the electrical connector (3) to the latch release switch.
    4. Fig 2: Separating Inner Midgate
    GM1412513Courtesy of GENERAL MOTORS CORP.
  4. Install the midgate inner panel. Refer to Midgate Panel Replacement - Inner .
scientia non olet · About LEMON Manuals