Removal Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Remove the left hand catalytic convert. Refer to Catalytic Converter Replacement in Engine Exhaust.

Fig 1: View Of Ground Cable Bolt At Engine Block

Courtesy of GENERAL MOTORS CORP.

Remove the engine wiring harness ground bolt.
Lower the vehicle.

Fig 2: View Of Ground Strap Nut At Front Of Dash Stud

Courtesy of GENERAL MOTORS CORP.

Remove the ground strap nut from the stud at the front of dash.
Remove the ground strap from the stud.