Disabling Procedure
WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the steering wheel until the vehicle's wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition.
- Remove the SIR Fuse (1) from the underhood fuse block.
- Remove the connector position assurance (CPA) from the (1) instrument panel (I/P) module yellow 2-way connector (2) located behind the I/P module.
- Disconnect the (1) I/P module yellow 2-way connector (2) located behind the I/P module.
IMPORTANT:
Refer to SIR Service Precautions before disabling the SIR system.
IMPORTANT:
With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate an SIR system malfunction.
Fig 2: Removing The Connector Position Assurance (CPA) From The I/P Module Yellow 4-Way Connector - Zone 5