Disabling Procedure
WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the steering wheel until the vehicle's wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition.
- Remove the SIR fuse (1) from the underhood fuse block.
- Remove the connector position assurance (CPA) from the (1) steering wheel module yellow 2-way connector (2) located left of the steering column near the knee bolster.
- Disconnect the (1) steering wheel module yellow 2-way connector (2) located left of the steering column near the knee bolster.
IMPORTANT:
Refer to SIR Service Precautions before disabling the SIR system.
IMPORTANT:
With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate an SIR system malfunction.