Disabling Procedure
WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Refer to SIR Service Precautions before disabling the SIR system.
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition.
- Remove the engine protection shield, if equipped.
- Remove the SIR fuse (1) from the underhood fuse block.
- Raise and support the vehicle.
- Remove the connector position assurance (CPA) from both electronic frontal sensor (EFS) connectors located on the frame crossmember.
- Disconnect the EFS connectors.
IMPORTANT:
With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate an SIR system malfunction.