LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> LeSabre Limited, 4T65E/M15 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (L36) >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the drive belt. Refer to Drive Belt Replacement (L36) in Engine Mechanical - 3.8L.
  3. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) in Engine Mechanical - 3.8L.
    4. Fig 1: View of Generator & Battery Positive Lead
    GM439097Courtesy of GENERAL MOTORS CORP.
  4. Remove the fasteners securing the generator brace.
  5. Remove the generator brace.
  6. Disconnect the wiring harness connector from the generator.
  7. Reposition the protective boot from the generator output BAT terminal for access.
  8. Remove the generator output BAT terminal nut and disconnect the battery positive lead from the generator.
    9. Fig 2: View of Generator
    GM439092Courtesy of GENERAL MOTORS CORP.
  9. Remove the generator mounting bolts.
  10. Remove the generator from the vehicle.
scientia non olet · About LEMON Manuals