LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Replacement - Front Bucket >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Seat Bolts
    GM305124Courtesy of GENERAL MOTORS CORP.
  1. Position the bucket seat into the vehicle.
  2. Engage the front hook attachments to the floor pan.
  3. Tip the seat forward and connect the following connectors, if equipped:
    • The power seat electrical connector
    • The electrical seat heater connector
    • The driver side air bag electrical connector
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the bolts which secure the front bucket seat adjuster to the floor pan.

    Tighten:  Tighten the bolts to 42 N.m (31 lb ft).

  5. Install the adjuster track covers. Refer to Seat Adjuster Track Cover Replacement - Front .
    6. Fig 2: Identifying Seat Belt Anchor Plate Nut
    GM370568Courtesy of GENERAL MOTORS CORP.
  6. Install the nut to the seat belt anchor plate.

    Tighten:  Tighten the nut to 42 N.m (31 lb ft).

  7. Install the head restraint. Refer to Head Restraint Replacement - Front Seat .
  8. Enable the SIR system if the seat is equipped with air bag. Refer to SIR Disabling and Enabling Zone 7 in SIR.
  9. Inspect the bucket seat for proper operation and adjustment.
  10. Position the seat to the original position.
scientia non olet · About LEMON Manuals