LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Limited >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure

Installation Procedure

  1. Install the cruise control module on the shock tower mounting studs.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the cruise control module retaining nuts.

    Tighten:  Tighten the cruise control module to shock tower nuts to 2 N.m (18 lb in).

    3. Fig 1: Cruise Control Module Retaining Nuts At Shock Tower
    GM294525Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the cruise control module.
  4. Install the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement (3.1L)  or Cruise Control Cable Replacement (3.8L) .
    5. Fig 2: Cruise Control Cable At Cruise Control Module
    GM294519Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals