LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Custom >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (3.8L) >> Removal Procedure

Removal Procedure

    Fig 1: Generator & Bolts (3.8L)
    GM302324Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the drive belt from the generator. Refer to Drive Belt Replacement (L36) or Drive Belt Replacement (L67) in Engine Mechanical - 3.8L.
  3. Remove the generator rear brace. Refer to Generator Brace Replacement (L36)  or Generator Brace Replacement (L67) .
  4. Remove the bolts (1, 3) and the stud (2) from the generator.
  5. Disconnect the electrical connector from the generator.
  6. Position aside the protective boot from the generator output BAT terminal for access.
  7. Remove the generator output BAT terminal nut and remove the positive battery lead from the generator.
  8. Remove the generator.
scientia non olet · About LEMON Manuals