LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Transmission Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Wiper Transmission, Caps & Screws
    GM334247Courtesy of GENERAL MOTORS CORP.
  1. position the wiper transmission to the wiper drive system module tube frame.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install wiper transmission screws.

    Tighten:  Tighten the screws to 9 N.m (80 lb in).

  3. Install the wiper transmission caps.
  4. Install the wiper drive system module. Refer to Wiper Drive System Module Replacement .
  5. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  6. Operate the windshield wipers and inspect for proper operation.
scientia non olet · About LEMON Manuals