Rear Toe Adjustment

Fig 1: View Of Jam Nut At Rear Wheel Spindle Rod

Courtesy of GENERAL MOTORS CORP.

Fig 2: View Of Rear Toe Adjustment

Courtesy of GENERAL MOTORS CORP.

Adjust the toe to the proper setting by turning the adjusting nut. Refer to Wheel Alignment Specifications (Regal) or Wheel Alignment Specifications (Century) .

Fig 3: View Of Jam Nut At Rear Wheel Spindle Rod

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten the hex nuts on the rear wheel spindle rod (rear).
Tighten: Tighten the rear wheel spindle tie rod end jam nut to 68 N.m (50 lb ft).