LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Shift Lever Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Slide the shift lever seal (2) up the shift lever (4).
  3. If necessary, remove the steering column trim covers. Refer toSteering Column Trim Covers Replacement .
  4. Disconnect the shift lever connector at the base of the column.
  5. Remove the shift lever screw (3) from the shift lever assembly (4).
    Fig 1: View Of Shift Lever, Seal (Boot), Screw & Upper Trim Cover
    GM419648Courtesy of GENERAL MOTORS CORP.
  6. Remove the shift lever and seal from the linear shift assembly.
    7. IMPORTANT: The shift lever seal must be removed by sliding the shift lever seal towards the narrow section of the shift lever.
  7. Remove the shift lever seal (2) from the shift lever (4).
scientia non olet · About LEMON Manuals