LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls 3.1L (Introduction, Service & Replacement) >> Repair Instructions >> Knock Sensor (KS) Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the knock sensor electrical connector.
    3. Fig 1: View Of Knock Sensor
    GM12755Courtesy of GENERAL MOTORS CORP.
  3. Remove the knock sensor from the engine block.
scientia non olet · About LEMON Manuals