LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

    Fig 1: Connecting Power Front Seat Switch Electrical Connector
    GM527143Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the power front seat switch.
    2. Fig 2: Installing Seat Switch To Trim Pane Screws
    GM527144Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to the seat switch to the trim panel.

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

  3. Install the front seat cushion outer trim panel. Refer to Trim Panel Replacement - Front Seat .
scientia non olet · About LEMON Manuals