LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1318 (Wiper System And Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Trim Cover of Rain Sensor Module
    GM746989Courtesy of GENERAL MOTORS CORP.
  1. Remove the trim cover from the rain sensor module.
    2. Fig 2: View of Windshield Coupler Clips, Rain Sensor Module, & Electrical Connector
    GM746991Courtesy of GENERAL MOTORS CORP.
  2. Release the windshield coupler clips.
  3. Remove the rain sensor module.
  4. Disconnect the electrical connector from the rain sensor module.
scientia non olet · About LEMON Manuals