LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1314 (Body Front End) >> Repair Instructions >> Fender Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Installing Fender and Fender Fasteners
    GM130503Courtesy of GENERAL MOTORS CORP.
  1. Install the fender (1) to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fender fasteners (2).

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

  3. Install the fascia to fender fasteners. Refer to Fascia Replacement - Front Bumper .
  4. Install the air deflector. Refer to Air Deflector Replacement - Front  .
  5. Install the rocker molding. Refer to Molding Replacement - Rocker Panel in Exterior Trim.
scientia non olet · About LEMON Manuals