LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1290 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left IP trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Left in Instrument Panel, Gages and Console.
    2. Fig 1: View of Electrical Connectors
    GM428497Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connectors (2, 3).
    3. Fig 2: View of Fastener & Headlamp Switch
    GM660090Courtesy of GENERAL MOTORS CORP.
  3. Remove the headlamp switch from the left IP trim plate.
    1. Remove the fastener (1).
    2. Tilt the headlamp switch (2) to remove.
scientia non olet · About LEMON Manuals